Skip to main content

Neo Zx Tole Action Figure- Max Factory Bio Fighter Collection 08 Review

Written by Jax. Pictures Courtesy of Donnay

Packaging in this installment of the Max Factory Bio Fighter Collection Neo ZX-Tole is the same as the previous one of Gyout. Neo ZX-Tole has been converted from a Hyper Zoanoid into a Lost Number. He gave up his status as a Hyper Zoanoid just so that he can be reprocessed to encompass all of the Hyper Zoanoid Team 5's abilities in order to seek revenge on Aptom. It also means he has only 1 day to live and he intends to take down Aptom and the Guyvers before he dies.


The glossy shiny look on the body is not a result of photoshop. They do really reflect light so well.Bio Missiles on the shoulders.Can be installed by removing the shoulder pads and replacing with the Bio Missiles shoulder attachments. Pops on and off similar to those on the Aptom Figure.

Centre horn can be folded backwards to reveal the Head Beam Cannon.The two horns on the head allows slight opening and closing motion.This is necessary so that they do not get in the way of the shoulder Bio Missiles.Flaps on the arms and on the thighs can be opened to reveal the arms and legs beam cannons. Similar to Zx-Tole, the mechanism for toggling the stomach beam cannon open and closed is retained in the Neo Zx Tole Figure.

Wings are also included and are similar in design to that of Aptom and Zx-Tole. The mechanism for putting them on are the same as Zx Tole.


A new addition for the Neo ZX-Tole is the high frequency swords. Aptom does not have this ability because this came from Thancrus, who was killed by Guyver III before Aptom could have a chance of absorbing him.


I personally prefer the Neo ZX-Tole figure more then Zx Tole. I think the design of the horns on the head played a big part. With this design, the massive head sorts of balances out the bulk of the body and Neo Zx Tole looks big strong and powerful, while Zx-Tole looked abit clumsy with a big body and small skinny horns on the head.
                                      
He is quite a tragic character in the anime. Check out the final battle between Neo ZX-Tole and the Gigantic Guyver . Beware of spoilers though.

Comments

Popular posts from this blog

Toy Review: Max Factory Figma Guyver I Figure vs Maxfactory Bio Fighter Collection Guyver I Figure

I have been a collector of the Maxfactory Bio Fighter Collection Guyver figures for many years now and it was only recently that the Figma Guyver I  came to my attention. Even though I have seen pictures of the Figma Guyver I figure for a while, I had always thought that it was just a scaled down version of the previous Bio Fighter Collection Guyver I figure. It turns out that I was wrong and there are many differences between the old and new Guyver figure and the  Figma Guyver I   could be a good start to a promising toy line. In terms of scale, the Figma Guyver I figure is smaller than the BFC Guyver I figure but the differences do not stop here. Articulation and paint job wise, the Figma version is fantastic and even more articulated than the BFC version. For example, the Figma Guyver I can actually perform a high kick and a split which the BFC Guyver I is not able to, due to the very hard rubber located near the waist. Also, you can switch out the chest p

Guyver Figure- Guyver III Max Factory Bio Fighter Collection 01 Review

Written By Jax. Pics Courtesy of Donnay The Guyver Figures from the Max Factory Bio Fighter Collection are one of the coolest toy figures I have ever came across. The  Guyver III Bio Fighter Collection Series 01 (Max Factory)  is the first figure of this series. Lets review it point by point: Packaging: I personally love the packaging for this series. The outer layer is a transparent box which offers protection for the second layer. The second layer is the packaging which houses the plastic covers that sandwiches the Guyver III within it. It really looks good on display with all the printouts of the images of the toy itself, as well as display of the arsenal of interchangable arms and blades(more on this later). What is best is that you do not need to make any cuts or tears to the box in order to get the toy out. This means that if at any point you do not want to display the  Guyver III  figure any more, you can just pack it back in to the box just like the first day you re

Gigantic Dark Guyver III Action Figure- Max Factory Guyver Bio Fighter Collection 09 Review

Written by Jax Pics Courtesy of Donnay The packaging for the  Gigantic Dark Guyver  is as shown. Box art looks great, and all the accessories can be seen through the clear display window. The   Gigantic Dark Guyver   comes with GigaSmasher changeable part, Gravity ram (long and short), Two interchangeable heads, one with sonic orbs closed and one open, three high frequency swords for each arm, interchangeable wrist parts (fist, grab, and hold), and an improved display stand (more on this) After spending about 10 mins untying all the wiring binding the Gigantic Dark Figure, he is finally released from his plastic prison and ready for action! But first let me point out a personal experience I had with the Gigantic Dark Guyver's High Frequency Blades. Everyone should take note of this. The three blades on the arm work this way. The longest and second longest blades have holes on the ends of the blades it self. On the arms there are corresponding pegs where you can fit